Miotal tionscail eidhneán-eidhneán Primer Séalaithe LaTeX Aicrileach Ardchumhachta le cumhacht treáite den scoth
Iarratas
Tá greamaitheacht den scoth aige le foshraitheanna cruach agus primers uiscebhunaithe den chineál céanna, agus airíonna fisiciúla agus meicniúla den scoth tar éis don tonn péint triomú.
5. Tá caomhnú éadrom den scoth agus caomhnú dathanna ag an scannán péint tar éis a thriomú.
Feidhm a mholtar Tá sé oiriúnach do chosaint draenála trucailí, páirteanna innealra, trealamh tionsclaíoch éadrom, srl. I gcás go bhfuil ardchosaint ag teastáil.
Sonraí teicniúla Dath assorted
Dromchla tirim (in-inúsáidteacht 50%) 15 ℃ C <1h ； 25'C <0.5h
Tirim sholadach (taise 50%) 15'C <48h; 25 ° C <24h
Buaileann "kg.cm" 50
Ní shéideann scannán péint uisce (50 ± 5μm) 72h, ní chabhraíonn sé le titim, ní le meirge.
Cruas 0.3 (luascadán dúbailte) tiús scannáin a thástáil ar mhaoin mheicniúil (23 ± 3jμm)
Greamaitheacht (Hegelian) Leibhéal 1
Cóireáil dromchla Ba chóir go mbeadh dromchla an ábhair brataithe saor ó thaise, ola, carbón aigéadach agus fuinseog.
Sonraí Tapa
Cruach le craiceann ocsaíd: Ba chóir modhanna pléasctha lámhaigh nó pléasctha gaineamh mar phróiseáil go leibhéal Sa2.5, i gcás nach féidir pléascadh gaineamh a dhéanamh snasta go meicniúil nó
Déileáiltear go ceimiceach leis na guaillí briste ar snámh a bhaint.
Cruach gan chraiceann ocsaíd: gaineamh-ghainmheach (gránghunna) go Sa2.5 nó uirlisí meilte leictreacha aerghníomhachtaithe go St3.
Táthú, gearradh lasair nó ceartú tinte ealaíne ar cheantair áirse dóite: meilt go leibhéal St3.
Bunábhar le sean-scannán péint: bain seancháithníní péint scaoilte agus meirge, agus gaineamh go St3 le huirlisí sanding aeir nó leictreacha.
Is féidir pacáiste péinteála tipiciúil a úsáid le primer uisce-bhunaithe H902, nó é a úsáid ina aonar mar chóta barr maisiúil ginearálta, nó a úsáid le cineálacha eile táirgí primer (is gá é a mheaitseáil lena fhíorú).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
